Products Description
Standard material: sealing ring: polyurethane PU, retaining ring: nylon PA
Scope of application:
This product is used in combination with piston rod seals to absorb shock and fluctuating pressure under high load, isolate high-temperature fluid and improve the durability of seals. It can be used for power shovel, wheel loader, bulldozer, truck crane, wheel crane, dump truck, etc
Features:
The special shaped slot on the sliding lip that can discharge back pressure can eliminate the pressure between the piston rod seal and the buffer ring.
Technical parameter:
|
Speed |
Pressure range |
Temperature range |
Medium |
Diameter range available |
|
1m/s |
0~50mpa |
-45°c+110°c |
General petroleum based hydraulic oil |
40-400mm |
Buffer ring equipment
Buffer ring must necessarily be equipped at the gap.
AsinFIG."A"and 'B' watch out for the orientation of back-up ring and PTFE ring.
|
Test |
Dimension |
BKS |
|
||
|
Material code |
|
GOLD |
BROWN |
BLUE |
|
|
Hardness |
Shore A |
92 |
93 |
95 |
|
|
Tensile Strength |
Kgf/cm |
415 |
400 |
580 |
|
|
100%Modulud |
Kgf/cm |
105 |
100 |
128 |
Force when fulling at 100% |
|
Elongation |
% |
530 |
480 |
491 |
|
|
Permanent Compression Set |
A;100° cx70H |
36(A) |
37(A) |
38(A) |
Strain rate with 70H at 100 degrees and 25%compression 70H |
|
B:70° cx70H |
20(B) |
23(B) |
23(B) |
||
|
Hardness Change By Air Oven |
100°cx70H |
0 |
0 |
0 |
|
|
Low temperature Brittleness(TR10) |
°C |
-30 |
-27 |
-30 |
10%recovery temperature |
|
Temperature Pange |
°C |
+140/-40 |
+135/-40 |
+130/-35 |
|
|
Temperature short term
|
°C |
+150 |
+140 |
+135 |
|
Hydraulic seal kit- Buffer seals/buffer rings
HBY buffer ring does more then normal buffer ring does, not only just buffer the pressure spikes of hydraulic systems, but also acts as a primary seal and pressure spike suppressor. It is mainly used in construction machinery cylinder.
Hot Tags: hydraulic hammer hby buffer seal, China hydraulic hammer hby buffer seal manufacturers, suppliers, factory, Rock Breaker Parts Pu Rubber Pad, SG 180 SG 195FB SG 200, Bks Seals for Furukawa Breaker Hammer, Polyurethane Hydraulic Breaker Parts Damper, Lg Breaker Hammer for Seal Kit Available, SB40 SB43 SB50 SB81 SB81N SB121 SB131 SB151
